Do you need help? Here Us: +86-757-85577526 Mon-Fri: 9am-6pm
Certified Company ISO 9001:2021
Certified Company ISO 9001:14949


4 Maintenance Tips For Aluminium Doors
25 Apr, 2023

4 Maintenance Tips For Aluminium Doors

Aluminium doors are a popular choice among homeowners due to their durability, aesthetic appeal and low maintenance requirements. However, like any other component of your home, aluminium doors also need regular maintenance to keep them functioning optimally and looking good. Here are 4 tips for maintenance of the aluminium doors as the following:

Clean Your Aluminium Doors Regularly

The first and most crucial advice for maintaining aluminium doors is to clean them on a regular basis. Dirt, filth, and dust can collect on your door's surface, making it appear drab and unpleasant. Moreover, if left unchecked, these contaminants can corrode the surface of your door, leading to structural damage and decreased lifespan.

Begin by cleaning the surface of your aluminium door with a soft cloth or sponge bathed in a mixture of warm water and mild soap. Abrasive cleaners and steel wool should be avoided since they might harm the surface of your door. After wiping, rinse the door with clean water and dry it with a soft cloth. You can also use a commercial aluminium cleaner to remove tough stains and grime.

Aluminium Swing Door Price

Aluminium Swing Door Price

Lubricate Door Hinges and Locks

The second important maintenance tip for aluminium doors is to lubricate the hinges and locks. Over time, the hinges and locks of your door can become stiff and difficult to operate due to rust, dirt, or lack of lubrication. If left neglected, this can lead to door faults and even breaking.

To lubricate your aluminium door hinges and locks, start by wiping them with a clean cloth to remove any dirt or debris. Then, lubricate the hinges and locks with a little amount of silicone-based lubricant. Avoid using oil-based lubricants since they can trap dirt and debris, causing further issues.

Inspect and Tighten Hardware

The third maintenance tip for aluminium doors is to inspect and tighten all hardware regularly. Because of typical wear and use, the hardware on your door, such as screws, bolts, and nuts, might become loose over time. Loose hardware might cause your door to droop, stick, or fail to close correctly, posing security and safety risks.

To inspect your aluminium door hardware, start by checking all screws, bolts, and nuts for looseness. Use a screwdriver or wrench to tighten any loose hardware, being careful not to overtighten and cause damage to the door or hardware.

Aluminium Sliding Door Manufacturers

Aluminium Sliding Door Manufacturers

Check and Replace Weatherstripping

The fourth maintenance tip for aluminum doors is to check and replace the weatherstripping regularly. Weatherstripping is the material that seals the gap between the door and the frame, preventing drafts, noise, and moisture from entering your home. Weatherstripping can get worn or damaged over time, resulting in diminished efficiency and increased energy expenses.

To check your aluminum door weatherstripping, start by inspecting the edges of the door and frame for any visible signs of wear or damage. It's time to replace the weatherstripping if you find any holes or rips. Weatherstripping material may be purchased at your local hardware shop and installed yourself, or you can pay a professional to do it for you.


However, to keep your aluminum doors looking and functioning their best, it’s important to follow these four important maintenance tips regularly. Besides, if you are looking for new aluminum doors, try XIANGZHEN's differences! Get in touch with us today!

Leave a comment